====== Create EPS and PDF directly from MATLAB script using Makefile ======
It is possible to run MATLAB from the command line and have it produce eps files from an existing MATLAB script (m file). 

====  Prerequisites  ====
You need a MATLAB version that can be run from the command line, and its location must be in your ''$PATH''. On Linux/Unix systems this is normally the case if MATLAB is installed. On Mac OS X, you need to add the directory
  /Applications/MATLAB72/bin
to your ''$PATH'' (for MATLAB 7.2). 

To verify that MATLAB is indeed accessible from the command line, enter the following in your terminal.
  $ matlab -nodisplay -nojvm
If MATLAB and the ''$PATH'' are properly configured, you should be greeted with the following prompt:
  Warning: 
    MATLAB is starting without a display, using internal event queue.
    You will not be able to display graphics on the screen.
  
  
                                < M A T L A B >
                     Copyright 1984-2006 The MathWorks, Inc.
                           Version 7.2.0.283 (R2006a)
                                January 27, 2006 
  
    To get started, type one of these: helpwin, helpdesk, or demo.
    For product information, visit www.mathworks.com.
   
  >>


====  Doing the Job  ====
Suppose we want to include in a LaTeX file a plot of a sinusoidal curve. One way of doing this is to start MATLAB, write a script ''myfig.m'' to plot the curve, and use the menu option "File/Save..." to save the figure as an eps file ''myfig.eps''. If we use ''pdflatex'', we might in addition want to convert the eps file to pdf using ''epstopdf''. 

Wouldn't it be much simpler to define a Makefile that can create ''myfig.eps'' and ''myfig.pdf'' automatically, and update them whenever ''myfig.m'' has changed? Consider the following example file ''myfig.m'':
  d = 1;
  fc = 10;
  fs = 1000; 
  
  t = linspace(0, d, d*fs);
  s = cos(2*pi*fc*t);
  
  plot(t, s);
  xlabel('t');
  ylabel('s(t)');
  title('Sinusoidal signal');
If we run this script in MATLAB (in graphical mode, not on the command line), we will get a nice figure window that we can save to an eps file as described before. As a first automatization step, we can get MATLAB to automatically save the figure to eps by adding the following line.
  print(gcf, '-depsc2', 'myfig.eps');
This tells MATLAB to write the current figure to a file called ''myfig.eps'' in the eps format. (See the MATLAB help on ''print'' for the exact syntax.) If the size or dimensions of the figure in the eps file is not what you want, you can set the ''PaperPosition'' property of the figure. This property specifies the position and size of the figure in the file:
  >> get(gcf, 'PaperPosition')
  
    ans = [0.2500 0.2500 8.0000 6.0000]
These values correspond to defaults; the figure will be 8 inches wide and 6 inches high. If you want to reduce e.g. the height, use the command
  set(gcf, 'PaperPosition', [0.25 0.25 8 3]);
to change the height from 6 to 3 inches. 

Now what we want is to run this script from the command line. There are two ways to do this. The first is pass the script to MATLAB through STDIN, as follows
  $ matlab -nodisplay -nojvm < myfig.m
This will start MATLAB and then perform as if we had entered the commands in ''myfig.m'' one by one. Upon encountering the EOF (end-of-file) character in ''myfig.m'', MATLAB will automatically exit. 

The second method is using the ''-r'' parameter of the command line version of MATLAB, which tells it to execute the given commands. For our example:
  $ matlab -nodisplay -nojvm -r 'myfig; exit'
The ''exit'' command is necessary because otherwise MATLAB would wait for input after executing ''myfig''. Perhaps the advantage of the first method is that even if an error occurred in the script, MATLAB would eventually terminate once it encounters the end of the file. With the second method, an error in your script would cause MATLAB to abort and never execute the ''exit'' command.

**Update**: It appears that in MATLAB version 7.4 you need to put the following line at the end of your script, otherwise MATLAB won't terminate after execution:
  exit

====  The Makefile  ====
The following Makefile puts everything discussed above together:
  all: myfig.pdf
  
  %.eps: %.m
         matlab -nodisplay -nojvm < $< > /dev/null
  
  %.pdf: %.eps
         epstopdf $<
Here we added ''> /dev/null'' to suppress the output of MATLAB. (This however will hide potential error messages MATLAB produces.)

//Remark: // You could of course put a rule in your Makefile that makes your tex file dependent on myfig.pdf or myfig.eps.

**Problems:** While this method works fine, it would be nice if MATLAB would return with a non-zero return code to let make know that there was an error.